Demineralizer used for pretreatment

Demineralization plants
- without pretreatment

Demineralization is the removal of dissolved solids in the water through ion exchange. A demineralizer from EUROWATER requires no special pre-treatment of the inlet water to achieve demineralized water quality. The plants are used for many applications, including production of rinse water, process water, boiler water, and more.

The demineralization plants are two-column systems, where the water first passes through a cation exchange column and then next passes through an anion exchange column. 

Where a demineralizer makes a difference

Product overview

Our product range comprises a wide number of standard plants, all engineered and manufactured in-house. The starting point is our modular-built standard system ensuring high flexibility, high reliability in operation, and short delivery time. Each solution can be customized and built according to the specific application by adapting the choice of material, instrumentation, and control system - based on our combined know-how.

Plant design

The demineralization plants are available with semi-automatic or automatic regeneration. Semi-automatic demineralization plants require manual deployment of regeneration while an automatic plant initiates the regeneration when the capacity of the demineralizer is exhausted. 

 

Contact your local sales and service office for more information, data sheets and instructions. 


Contact us

Demineralizer DCME

Automatic
counter-current

Product type:DMCE
Modules:3
Flow rate up to:13 m3/h
Quality:2-5 µS/cm
Demineralizer DME

Automatic
co-current

Product type:DME
Modules:7
Flow rate up to:5 m3/h
Quality:5-20 µS/cm
Demineralizer DMHE

Automatic
co-current

Product type:DMHE
Modules:5
Flow rate up to:20 m3/h
Quality:5-20 µS/cm
Demineralizer DMS

Semi-automatic
co-current

Product type:DMS
Modules:8
Flow rate up to:5 m3/h
Quality:5-20 µS/cm

High water quality and low chemical consumption with counter-current regeneration

With counter-current regeneration, the flow direction during operation and regeneration is opposite. This provides a more efficient regeneration which results in lower chemical consumption and water quality as low as 1-5 µS/cm. Automatic counter-current regeneration is available in our demineralizer series DMCE.

To utilize the system capacity in a balanced way and to optimize consumption of chemicals for the neutralization process, the cation column is often smaller than the anion column.

Contact us for data sheets or more information.

Contact your sales and service office

 

Demineralizer DMCE with counter-current regeneration

Reliable demineralization plants

Anti-corrosion tanks

The filter tanks are made of steel and can resist pressure fluctuations. They are also surface coated with PPA, a high-performance factory applied polyethylene coating. Thus, the filter tanks combine the strength of steel with the strong anti-corrosion properties of the PPA (C5-M).

Fail-safe valve

Our patented five-cycle valve is designed especially for EUROWATER plants. It is made of high-quality synthetic material and has few movable parts. This ensures a reliable operation, long life, and minimum maintenance.

Pipe system

As standard, the supplied pipe system is of PVC and is resistant to corrosion and chemicals. All gaskets and O-rings are of silicone-free materials. The pipe system is also available in other materials such as PP and PVDF.

Standard control

Each demineralizer plant comes with a standard control panel. Our controls are purpose-made and individually programmed by our own control engineers. 

UPCORE for higher flow and self-cleaning units

Automatic demineralizers using the principle of UPCORE™ (UPflow COuntercurrent REgeneration) provides significant advantages:

  • High flow rate: up to 70 m3/h
  • High water quality: 1-3 μS/cm
  • Low chemical consumption
  • Constant, low pressure loss due to self-cleaning operating principle

Customized

IR-welded pipe system 

This UPCORE™ solution is packed with special features for a safe and reliable boiler operation at a zinc production. The solution is designed for a flow rate of 2 x 37 m3/h. 

PP-H pipe system
The pipe system is constructed in IR-welded PP-H. All welds are documented, both with a tag on the welding and a welding report. 

Regeneration with sulphuric acid
The regeneration is done with sulphuric acid (H2SO4) and not hydrochloric (HCI) as normally used to regenerate demineralization units. The advantages of sulphuric acid is that it does not cause any problems with chlorides in the waste water. However, is does generate a lot of heat. A special flow transmitter and an ejector device of heat resistant PVDF are installed on the acid side of the unit.

Explore this installation

 

 

Demineralized water with low conductivity

Mixed-bed plants are used for fine polishing of demineralized water. By treating demineralized water with low carbonic acid content, a conductivity of less than 0.1 µS/cm at 10°C can be achieved. 

Go to mixed-bed plants

Mixed-bed for polishing of demineralized water

Learn more about the optimum demineralization solution

In this leaflet you get facts on the demineralization process and how to get the optimum solution.

Download leaflet

Download leaflet about demineralizers

See references with demineralization plants

Get the optimum solution

Selection of unit depends on application, water quality, and water consumption. We are at your service to ensure the optimum solution based on our combined know-how. Fill in the form and let us get back to you.

We take good care of your information according to GDPR. Read about our privacy policy.

keyboard_arrow_up